Basalt fiber sheets for R/C use

 Sierra Composites has just released the first size of our Basalt fiber sheets specifically designed for R/C use. Basalt fiber composites have mechanical properties close and in some cases greater than carbon fiber sheets, the greatest difference is that they are very inexpensive. Basalt fiber sheets are also a great improvement over the typical fiberglass G-10 sheets. Fiberglass G-10 sheets are designed for printed electronic circuit boards not R/C applications and therefore have all the low grade qualities of e-glass fiberglass, the lowest of all composite fibers. Compare a typical G-10 garolite tensile strength of 40,000 psi to a basalt 9 micron fiber tensile strength of 70,000 psi. If you plan on using G-10 garolite for a structural application you can see how much more strength you could have by using a basalt sheet instead.

Remember Sierra Composites is the only North American manufacturer of basalt fiber sheets. Our sheets have an excellent surface ready for paint and a slight texture back for bonding. An 11″x8″ sheet at .022″ only weighs 1.9oz (53g) and the cost is only $11.95. 

Check these sheets out on our e-store right here.