Best carbon fiber prices also with adhesive back

In addition to our last price comparison post,  ”Sierra Composites still offers the best quality carbon fiber sheets AND at by far the best prices”. We also want to highlight the large price differences when including adhesive backing to the carbon fiber sheets. In fact there is a very large difference in price, ranging from 60% to a stunning 140% higher. As you can see in the charts below, its obvious who has the best prices anywhere. Have a look at the chart below what the actual total delivered carbon fiber sheet price to you the customer actually is. Sierra Composites total cost is $18.85 , PC total cost is $27.43 and DP total cost is $44.10.

Chart A current pricing as of 6/26/2011

Carbon Fiber Sheet Comparison Table for thin veneer + adhesive back
	Sheet size	Sheet price	Price per sq/inch	Shipping cost	Total cost
Sierra Comp	11”x8”	$13.90	$0.16	$4.95	$18.85
DP	12”x6”	$24.81	$0.34	$18.95	$44.10
MV	12”x9.7”	N/A	No Longer Selling	N/A	N/A
PC	12”x6”	$16.99	$0.24	$10.44	$27.43
*shipping based on 3 day service. *note DP/MV/PC websites do not calculate shipping right up front before you have to provide all your info to checkout.

Click here to look though Sierra Composites selection of carbon fiber sheets

Still the best carbon fiber sheets and still the best prices

Sierra Composites still offers the best quality carbon fiber sheets AND at by far the best prices. In fact there is a very large difference in price, ranging from 60% to a stunning 140% higher.  Its been quite a while since we updated current carbon fiber sheet pricing from ourselves and some of our competitors. As you can see in the charts below, its obvious who has the best prices anywhere.  Have a look at  the chart below what the actual total delivered carbon fiber sheet price to you the customer actually is. Sierra Composites total cost is $16.90 , PC total cost is $26.43 and DP total cost is $40.52.

Chart A current pricing as of 6/21/2011

Carbon Fiber Sheet Comparison Table for thin veneer
	Sheet size	Sheet price	Price per sq/inch	Shipping cost	Total cost
Sierra Comp	11”x8”	$11.95	$0.13	$4.95	$16.90
DP	12”x6”	$21.57	$0.30	$18.95	$40.52
MV	12”x9.7”	N/A	No Longer Selling	N/A	N/A
PC	12”x6”	$15.99	$0.22	$10.44	$26.43
*shipping based on 3 day service. *note DP/MV/PC websites do not calculate shipping right up front before you have to provide all your info to checkout.

Chart B previous pricing

Carbon Fiber Sheet Comparison Table for thin veneer
	Sheet size	Sheet price	Price per sq/inch	Shipping cost	Total cost
Sierra Comp	11”x8”	$11.95	$0.13	$4.95	$16.90
DP	12”x6”	$21.57	$0.29	$15.95	$37.52
MV	12”x9.7”	$35.00	$0.30	$8.52	$43.52
PC	11”x11”	$19.99	$0.16	??	At least $19.99+
*shipping based on 3 day service. *note DP/MV/PC websites do not calculate shipping right up front before you have to provide all your info to checkout.

Click here to look though Sierra Composites selection of carbon fiber sheets

GREEN carbon fiber color sheets

Sierra Composites has just introduced its GREEN color carbon fiber sheets. Sierra Composites is the only manufacturer of this product. Unlike traditional Kevlar/Carbon hybrid weaves, our sheets do not have one color fiber strand woven to a black strand, nor do they have workability issues that Kevlar fibers present. Our new Green carbon fiber sheets have a more subtle look and can reflect a lighter or darker green depending on the light source. Currently these are available in our .015″ sheets only. However we can manufacture any of our products to have the same green color look. Contact us with questions about that.

 GREEN color carbon fiber sheets available here

Carbon fiber 90mm EDF motor mount modification

Sierra Composites is a large supplier to the radio control community, as it has so many uses that it is best suited for. The example here is an excellent use of our carbon fiber .059″ sheet material as a motor mount repair / strengthening application on a 90mm EDF fan unit.  These EDF fans can turn in the 40,000 rpm range, and even with proper balancing cause some vibrations. The motor for this fan is a KD-36-74 and weighs 390 grams, it needs a solid motor mount. The stock motor mount in this Haoye 90mm fan unit is a weak spot and can not take motor heat in the 170 degF  range along with some vibrations. The mount design is weak to begin with. Our carbon fiber sheet was used to strengthen up that mount as shown in the photos. The carbon backup disc is bonded to the original plastic fan housing to become one complete part with the housing.

Visit www.sierracomposites.com to purchase our products.

More special R/C small project sheets

Our customers requested it, so we made it (again). Sierra Composites has just released its small R/C project carbon fiber plate. These 1.2mm compliment our recently released 2.2mm double sided smooth / glossy plate sheets are very rigid and are well suited to small R/C structural parts such as shock towers and brackets. We know many in the R/C community fabricate thier own custom parts for cars, airplanes, boats and helicopters, Our new 5.5″ x 7.5″ carbon fiber plate sheets are perfect inexpensive way to make those parts.

Link to our store page right here

New carbon fiber sheet sizes

Sierra Composites customers requested that our carbon fiber sheets be available in half sheet sizes. So that’s exactly what we did. Our carbon fiber sheets in thickness .023″ / .041″ / .059″ and .125″ are all now available in half sheet sizes of 5.5″ x 8″.

To view our wide selection of carbon fiber sheets please visit www.sierracomposites.com

Real carbon fibers? maybe - Real carbon fiber sheet composite? No

Since Sierra Composites was first made aware of a product that was called “Carbon Fiber Sheet” but was possibly raw carbon fiber fabric sandwiched between a clear vinyl on top and an adhesive backing. Further research has found the manufacturer of this “sort of ” carbon fiber sheet, its from an offshore company called Senko http://www.senkostyle.com/ under a heading of “Films” or “Laminate Films”. The company makes a wide variety of these films and adhesive films, tapes and a wide range of other products. The carbon fiber sheet film product is brand marketed under the name Senko Performance Carbon or Performance Carbon. How do we know the film construction is as we say, easy, we can peel apart the clear vinyl sticker on top from the carbon like fabric. Why do I say “carbon like fabric”, well judging from products that are made in China and based on what this product’s retail price is, I would suggest that most likely this is a E-Fiberglass approx 5.7 oz 2×2 twill weave that has been dyed black with the clear vinyl sticker on top and a non-3M adhesive backing of unknown quality.  We also noticed that most all photos of this product do not show the texture that is on the good side, but we have found a few that shows the true product. Now we are not claiming that this “carbon fiber sheet” is no good, maybe for your application it works, but it definitely is not true carbon fiber sheet composite as many would believe it is. For real carbon fiber sheet products visit our online store at www.sierracomposites.com

 

Sierra Composites carbon fiber sheet below

Free Silver Texalium Sheet at Sierra Composites

From Dec 1st to Dec 31st, Sierra Composites is giving away a FREE 8″x5″ @ .015″ Silver Texalium sheet with 3M adhesive with every purchase. No catches or fine print besides limit one per order. Click on over to the Sierra Composites online store to take advantage of this FREE offer.

Carbon fiber signs at indoor karting and restaurant facility

 A couple years ago Sierra Composites teamed up with a design studio in Chicago to fabricate some custom carbon fiber sheets for one of their clients. Those carbon fiber sheet laminates were used around the facility as signage. They were made from our .059″ carbon fiber sheet and mounted to the walls with standoffs so they “floated” off the wall. We have had this photo for quite a while and forgot about it. Its a great photo showing how Sierra Composites carbon fiber products are used in may applications. The restaurant is Stewart’s Bar and Grille located in the Chicago Indoor Racing complex in Buffalo Grove Ill.

Custom size carbon fiber sheet and sandwich panels

Sierra Composites has been manufacturing custom sized carbon fiber sheets and sandwich panels for our customers for many years. If your project requires a size that you can not find in our standard size sheets, all you need to do is contact us with your requirements. We will get back to you asap with a pricing quote. Many times we can make your sheet along with others orders we are already working on. So don’t think your custom sized sheet or panel is going to cost more. If its just a small piece you need, we may even have that available as a cut off from another order. Please feel free to contact us with your custom carbon fiber sheet and panel sizes. Visit the Sierra Composites contact page

Next Page »